![\"\"](\"http:\/\/pimpmyboardgame.com\/wp-content\/uploads\/2018\/02\/walking-dead-all-out-war-custom-truck-02.jpg\")
<\/a><\/p>\nI already have two of these painted up so I wanted to do something a little different with a third open and, as I said just Monday<\/a>, I’m really in to lighting things up. But first I need to see what is under the hood.<\/p>\n <\/p>\n Well there’s yer problem! Ain’t got nothin’ insider.\u00a0 We’ll have to fix that.<\/p>\n But first let’s back up. Removing the hood is pretty easy. Just follow the mold lines and go slow with a combination of Xacto Knife and Razor Saw.\u00a0 Take your time and wear gloves if you’re prone to accidental gouging.\u00a0\u00a0 After the hood is off, sand it down a little to smooth out the rough edges.<\/p>\n As you can see from the open hood shot, there is a lot of plastic to work through.\u00a0 After I had scored a deep enough line with the knife, I switched to a very slow motion with the razor saw (so I didn’t risk jumping the line and scratching the model- not a big deal though as you can hide the scratches or enhance them when you paint)<\/p>\n After that, it’s priming and painting all over again.\u00a0 I painted the inside black as well in case it helped or if anything ends up showing after adding the lights.<\/p>\n What’s nice is the pimping is pretty self contained and you can easily put the light in or remove it on the fly as the hood will stay on pretty well.<\/p>\n For the lights, it’s just a simple LED tea light again, cut down a little on the sides to fit under the body then primed black so it isn’t as noticeable when sitting under the vehicle.<\/p>\n The smoke is just standard cotton filler with a\u00a0 dusting of black primer as well.\u00a0 I tend to go heavy on the top and lighter as I go lower to get the best effect.<\/p>\n With everything lit up, this classic effect works well and is really easy to achieve.<\/p>\n I used clear packing tape to tape the inside of the hood to the inside of the frame in the open position.\u00a0 Next, shove the cotton inside and put the light in the bottom and that’s it.<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n