![\"\"](\"http:\/\/pimpmyboardgame.com\/wp-content\/uploads\/2017\/08\/CFR_Abu_Dhabi_2.jpg\")
<\/a><\/p>\n<\/p>\n
Abu Dhabi was released on the CFR Kickstarter<\/a> page as a downloadable extra while Jolly Roger Games figures out what to do about the board vs car size issue.\u00a0\u00a0 Since I skipped the issue by picking up my own car miniatures, the board is a nice little bonus edition.\u00a0 Doug Schulz, the main designer behind this CFR renaissance, has a lot of extra boards (and how to make your own) on his site<\/a> but I don’t think any are print-ready and in the same style as the CFR game.<\/p>\n Printing this was obscenely easy.\u00a0 I went from getting the file, adjusting the size, sending to printer and picking up finished print all in a Sunday afternoon.<\/p>\n First thing I did is run the board file through Photoshop and cropped a small section out to print at home to test the spacing.\u00a0\u00a0 The test was successful and so I checked out Walmart’s photo site online and found the best option they had was a 20 x 30 print size.\u00a0 I opened up the file again and added to the overall print size to match 20 x 30 and filled in the new space.\u00a0 I’ve talked about using Walmart awhile back when I made my Thunder Road custom boards<\/a> and this was no different. Well, a little different as I “splurged” and decided to get the mounted backing print. It’s a $10 difference.\u00a0 Art board is about $6-$8 so it was worth it to go ahead and have them mount the print.\u00a0 The total was about $30 and I found out when I went to pick up the print that there was a smaller option not listed on their website that would have required no extra space for cheaper.\u00a0 Ah well. I’m still happy with the results.<\/p>\n As you can see, the Abu Dhabi board is a little bigger than the standard boards.\u00a0 Luckily the box has enough room to fit a 20 x 30 tri-fold board (down to 10 x 10) so I’m not worried.<\/p>\n The print quality of the file is great and very legible.<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n